Why We Made Tailored Tape-In

Why We Made Tailored Tape-In

The Making of Tailored is a series about the thinking behind each Extensionology product: why it looks the way it does, and what that means in the salon chair.

Close-up of a Tailored Tape-In tab, with the hair coming out of the tab itself

The Tailored tab. The hair comes out of the tab itself instead of hanging below it.

Of everything we make, Tailored Tape-In is one of the hardest to produce. The process is demanding, and every piece takes more time and care than a standard tape-in. People sometimes ask why we bother. The short answer is that it was made for a client the industry wasn't serving very well.

Two clients, two very different problems

When a client with thick hair wants more length, hiding the extensions is rarely the hard part. There's plenty of natural hair to cover them.

A client with fine or thin hair often comes in for something else: volume. For her, hiding the extensions is the whole challenge.

To be honest, individual methods like keratin tips can give fine hair a beautiful result. But the installation is harsher on the hair, and if a bond is applied or removed the wrong way, the damage can be greater. For someone who doesn't have much hair to begin with, losing natural hair during a removal is a real worry.

That's why many clients with fine hair choose tape-ins. Done well, tape-in is one of the gentlest methods there is.

The trouble with a bare tab

For years, most tape-ins on the market used a bare tab: a flat strip of tape with the hair attached underneath. At the back of the head, that works well. There's usually enough hair to cover it.

The sides are a different story. Around the face and above the ears, where hair is often finest, a bare tab can peek through. And that's exactly where a client looking for volume needs the most help.

Close-up of a Bare Tape-In tab, a flat matte tab with the hair attached below it

Our Bare tab. The hair sits below a flat, matte tab so it can rest flatter on the head. We still make it for stylists and clients who prefer it.

Hair that grows from the tab

So we built a tab where the hair comes out of the tab itself, the way hair grows from the scalp. If a little of the tab shows through, what you see is hair, not a strip of tape.

The back of the head was never the problem. Tailored Tape-In was made so the sides could work too.

Tailored Tape-In concealed beneath a light layer of natural hair

Tailored Tape-In is designed to disappear beneath even a light layer of natural hair.

The same goes for ponytails and updos. When hair is pulled up, tape-ins can show. With a Tailored tab, there's simply less to see. Wearing extensions is nothing to hide, but most clients would rather decide for themselves who knows.

More hair in every piece

The second difference is how much hair goes into each piece. Compared with typical tape-in pieces on the market, ours carry about 50% more hair at 14 and 18 inches, and about 80% more at 22 inches. The tab itself is only about 9% larger.

The reason is what too many sandwiches feel like. Tape-ins are usually installed as sandwiches: one piece above and one below a thin section of natural hair. When a whole head is covered in sandwiches, washing, drying and everyday maintenance get uncomfortable fast.

More hair per piece means fewer sandwiches for the same result. The install is easier to live with, less visible, and puts less stress on the natural hair.

Backing tape in every pack

Every Extensionology tape-in pack comes with backing tape, so your stylist can do a single-sided install.

Here's why that matters. Picture the sides of the head, above and around the ears, on someone with fine hair. A full sandwich there puts a lot of weight on a small amount of natural hair. It can feel uncomfortable, and over time it can be hard on the hair.

With backing tape, the extension goes on one side and the backing tape takes the place of the second piece. It's still a sandwich in structure, but there's no extra hair underneath. The extension holds securely without doubling the weight.

Extensionology backing tape for single-sided tape-in installation

Backing tape takes the place of the second extension, so a single piece can be installed on its own.

There's a visual benefit too. On fine hair, a full sandwich can make one spot look much fuller than the rest of the head, and that kind of bulk is easier to notice. A single-sided piece adds a reasonable amount of volume, and reasonable is what looks natural.

Why a pack has eight pieces

Most tape-in packs come with around 20 pieces, enough for ten sandwiches. Ours has eight pieces, plus eight backing tapes.

That means one pack can become four sandwiches or eight single-sided placements. For many clients who want more volume, one pack along the sides is enough. There's no need to buy a full head of hair just to get started.

That was very deliberate. A client trying extensions for the first time who ends up with ten sandwiches in her hair often finds it too much, and she may never want to try again. Starting with one pack lets her get comfortable wearing extensions first.

It works for stylists, too. They can offer a first install with a single pack without overwhelming a new client. When she's ready for more volume or wants to add length, she simply adds another pack. As a general guide, we suggest one to three packs for volume and three to five for longer length.

What it all comes down to

Every detail of Tailored Tape-In points to the same goal: extensions that are harder to see, gentler on the hair you already have, and easier to live with between appointments. It isn't the easiest product for us to make. But it's the one I'd want for a client with fine hair who simply wants to feel a little fuller and still look like herself.

— Founder, Extensionology